Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Filters








1,847 Hits in 2.1 sec

A Holistic Approach for Security Requirement Specification for Low-Cost, Distributed Ubiquitous Systems

Yanjun Zuo
2010 International Conference on Information Systems  
The unique features of such a class of ubiquitous systems make the security analysis different from that for the centralized computing paradigms.  ...  The class of low-cost, distributed ubiquitous systems represents a computing mode where a system has small, inexpensive networked processing devices, distributed at all scales throughout business activities  ...  Tag Robustness/fault tolerance The tag's ability to provide a reasonable level of robustness in critical services and fault tolerance.  ... 
dblp:conf/icis/Zuo10 fatcat:c6qupucncfeqpkzwyfml5bgoy4

RFID Technologies & Internet of Things

Luigi Patrono
2013 Journal of Communications Software and Systems  
In the work "Performance Evaluation of a Novel Animals Tracking System based on UHF RFID Technology" [1], the authors Luca Catarinucci, Riccardo Colella, Luca Mainetti, Vincenzo Mighali, Luigi Patrono,  ...  This special issue on RFID Technology and Internet of Things of the JOURNAL OF COMMUNICATIONS SOFTWARE AND SYSTEMS aims to report on the recent advancement and developments in various aspects of the IoT  ...  two fault-tolerant mechanisms.  ... 
doi:10.24138/jcomss.v9i1.152 fatcat:scd2xs2n7nehlmdkupwda75a4a

Prototypical implementation of location-aware services based on a middleware architecture for super-distributed RFID tag infrastructures

Jürgen Bohn
2006 Personal and Ubiquitous Computing  
failure of individual tags.  ...  We provide evidence of the feasibility and effectiveness of a middleware architecture for mobile devices (MoDs), which employs dense distributions of small computerized entities for providing fault-tolerant  ...  Acknowledgments We wish to thank Vito Piraino for his work on the implementation of the SDRI middleware prototype [5] .  ... 
doi:10.1007/s00779-006-0107-2 fatcat:spm4mweawjev3nxettnrsfofta

Adaptive Rfid Positioning System Using Signal Level Matrix

Ching-Sheng Wang, Xin-Mao Huang, Ming-Yu Hung
2010 Zenodo  
In this paper, we present a method named Signal Level Matrix (SLM) which can improve the accuracy and stability of active RFID indoor positioning system.  ...  Then, based on the proposed SLM concept and the characteristic of the signal strength value that attenuates as the distance increases, this system cross-examines the distribution of adjacent signals to  ...  The proposed fault-tolerance mechanism can solve this problem.  ... 
doi:10.5281/zenodo.1072092 fatcat:g4valfw3ynffjgq4nthivsbwx4

Prototypical Implementation of Location-Aware Services Based on Super-Distributed RFID Tags [chapter]

Jürgen Bohn
2006 Lecture Notes in Computer Science  
against failure of individual tags.  ...  We provide evidence of the feasibility and effectiveness of a middleware architecture for mobile devices which employs dense distributions of small computerized entities for providing fault-tolerant location-aware  ...  Acknowledgements We wish to thank Vito Piraino for his work on the implementation of the SDRI middleware prototype [13] .  ... 
doi:10.1007/11682127_6 fatcat:bp7bvlbcsbgqbmypfzaeicgn7y

SafeRFID-MW: a RFID Middleware with runtime fault diagnosis

Rafik Kheddam
2013 Journal of Communications Software and Systems  
In this paper, we propose a novel fault-tolerant RFID middleware providing two fault-tolerant mechan-isms.  ...  The first mechanism is an online diagnosis algorithm based on a statistical analysis of the generated RFID data to identify faulty components of the system such as faulty readers or tags.  ...  In this paper, we are interested in proposing on-line testing and fault tolerance facilities for RFID middleware.  ... 
doi:10.24138/jcomss.v9i1.158 fatcat:de35sklxxnftnbp6svkffn33ua

On the security of RFID devices against implementation attacks

Michael Hutter, Thomas Plos, Martin Feldhofer
2010 International Journal of Security and Networks (IJSN)  
In this paper, we evaluate the efficiency of implementation attacks by conducting side-channel attacks and fault analysis on both High Frequency (HF) and Ultra-High Frequency (UHF) RFID tags.  ...  The results of our investigations disclose the potential vulnerability of RFID-tag implementations against practical attacks.  ...  If the supply voltage exceeds the power-supply deviation tolerance of the device, the device might produce faults during the execution of algorithms.  ... 
doi:10.1504/ijsn.2010.032209 fatcat:wrr52g3ywnfjfdeheslrjl6nfm

Reliability Techniques for RFID-Based Object Tracking Applications

Ahmad Rahmati, Lin Zhong, Matti Hiltunen, Rittwik Jana
2007 37th Annual IEEE/IFIP International Conference on Dependable Systems and Networks (DSN'07)  
Our experiments show that the reliability of tag identification is affected by several factors, including the inter-tag distance, the distance between the tag and antenna, the orientation of the tag with  ...  respect to the antenna, and the location of the tag on the object.  ...  Redundancy in the form of replication is a widely used fault-tolerance technique for improving reliability.  ... 
doi:10.1109/dsn.2007.81 dblp:conf/dsn/RahmatiZHJ07 fatcat:6ijpecv36nbo7lvrwgmfrjo2mi

EMS: An Energy Management Scheme for Green IoT Environments

Omar Said, Zafer Al-Makhadmeh, Amr Tolba
2020 IEEE Access  
The third strategy provides a fault tolerance scenario that can be applied to address inevitable energy problems faced by IoT nodes.  ...  The Internet of Things (IoT) has important applications in all aspects of our lives in areas such as business, military, security, and health.  ...  Type 2 of the WSN fault tolerance strategy. (c). Type 3 of the WSN fault tolerance strategy. FIGURE 3 . 3 (a). The RFID tag fault tolerance scenario. (b).  ... 
doi:10.1109/access.2020.2976641 fatcat:ngx6g3g6lnd7foezaud5scqr3i

Reliability Evaluation Metrics for Internet of Things, Car Tracking System: A Review

Michael Onuoha Thomas, Babak Bashari Rad
2017 International Journal of Information Technology and Computer Science  
time without any failure, fault or errors occurring.  ...  The concept of reliability engineering is also discussed in respect to an important quality factor, which entails that systems must function correctly without fault, failure or errors, it provides benchmark  ...  Fault tolerance is considered as an important mechanism which ensures mitigation of faults or failure in a computing system [8] .  ... 
doi:10.5815/ijitcs.2017.02.01 fatcat:cuz52i2yfbgr3fxkvlqf4zih74

A Context-Oriented Framework for Software Testing in Pervasive Environment

Heng Lu
2007 29th International Conference on Software Engineering (ICSE'07 Companion)  
It may mislead the RFID readers to read the tag accidentally, while the tag is out of range [3] .  ...  For instance, in response to RFID reader signals, an RFID tag will disseminate RF signals to the readers, and thus the application, nearby.  ... 
doi:10.1109/icsecompanion.2007.10 dblp:conf/icse/Lu07 fatcat:d65hqett5vcs7mqd2tujinzvxq

iPOS: a fault‐tolerant and adaptive multi‐sensor positioning architecture with QoS guarantees

Jürgen Bohn, Stéphane Holé
2007 Sensor Review  
We describe the architecture of iPOS (short for iPAQ Positioning System), a fault-tolerant and adaptive self-positioning system with quality-of-service guarantees for resource-limited mobile devices.  ...  As proof of concept, we present a prototypical implementation and discuss an experimental evaluation of the iPOS system.  ...  Design Goals The mobile positioning system architecture we developed and prototypically implemented realises the following design goals: -Fault Tolerance: The system is capable of tolerating the temporary  ... 
doi:10.1108/02602280710758192 fatcat:lwliiazts5g3xervw53shabxwq

Study on the Feasibility of Smart-Banknotes

Hisao Sakazaki, Yasuko Fukuzawa
2015 Journal of Information Processing  
The effectiveness of the system was evaluated by fault tree analysis and flow model analysis.  ...  In this paper, we report a summary of the smart-banknote system and an evaluation of the effectiveness of the system.  ...  Evaluation of Tolerability against Low-level Counter- feiters The tolerability against low-level counterfeiters (namely, level-3 or lower) was evaluated.  ... 
doi:10.2197/ipsjjip.23.633 fatcat:hb7rjayswjafvcatl7zqh2twqu

Autonomous pipeline monitoring and maintenance system: a RFID-based approach

Jong-Hoon Kim, Gokarna Sharma, Noureddine Boudriga, S.S. Iyengar, Nagarajan Prabakar
2015 EURASIP Journal on Wireless Communications and Networking  
To overcome these challenges, we propose a novel Radio Frequency IDentification (RFID)-based Autonomous Maintenance system for Pipelines, called RAMP, which combines robotic, sensing, and RFID technologies  ...  Pipeline networks are one of the key infrastructures of our modern life.  ...  The McRAIT architecture provides fault-tolerance using multiple multi-channel RFID tags and adapts to the channel of each tag.  ... 
doi:10.1186/s13638-015-0495-y fatcat:yav2o6downc47avq6g4a3dyuqi

An efficient indoor navigation scheme using RFID-based delay tolerant network

Hao Ji, Lei Xie, Yafeng Yin, Sanglu Lu
2013 2013 IEEE Global Communications Conference (GLOBECOM)  
In this paper, we investigate into the problem of indoor navigation by using the RFID-based delay tolerant network.  ...  Zhu et al. propose an fault-tolerant RFID reader localization approach to solve the problem of frequent occurred RFID faults [13] .  ...  Management of RFID tags Because the memory size of RFID tag is limited, we should make full use of these storage resources. Under the navigation framework, post operation will write messages to tags.  ... 
doi:10.1109/glocom.2013.6831068 dblp:conf/globecom/JiXYL13 fatcat:zc6rcwmrhrhehmnbdzn4ufge4y
« Previous Showing results 1 — 15 out of 1,847 results