A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
Filters
APPLYING TEXTURE ANALYSIS TO INDUSTRIAL INSPECTION
[chapter]
2000
Series in Machine Perception and Artificial Intelligence
Preserved Fulltext
Despite the obvious needs of applications, texture analysis is a rare method in automated visual inspection outside textile industry. ...
This paper gives a brief overview of the problem space of applying texture analysis for industrial inspection, presenting some solutions proposed and their prerequisites. ...
For instance, the grain around a suspected defect in a lumber board helps in discriminating frequent stray bark particles from minor knots As a practical case, it is worth considering lumber inspection ...
doi:10.1142/9789812792495_0016
fatcat:ia5rxatqynad7pzqrpzrjxvomy
Indicating and analysis the interrelation between terms – visual: management, control, inspection and testing
2020
Production Engineering Archives
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
In particular, the noticed inaccuracies in the use of terms with the word "visual" concern such terms as visual: management, control, inspection, and testing, where, for example, in the Polish language ...
The article is an analysis of the literature related to these concepts, systematizes the types of visual concepts and methods in the area of production and quality. ...
Visual inspection (VI) and visual testing (VT) Visual inspection is a type of quality control, which consists of determining the properties of the inspection object (e.g. products, machines, devices, or ...
doi:10.30657/pea.2020.26.22
fatcat:csa5ewdsardzfn264b6fzmwgou
Smart board level machine vision system for online inspection: A Review
IJIREEICE - Electrical, Electronics, Instrumentation and Control
2015
IJIREEICE
IJIREEICE - Electrical, Electronics, Instrumentation and Control
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL.
The file type is application/pdf.
A simple and low cost machine vision system for fault detection and identification is envisaged. The proposed system works on a Beagle Board single board computer. ...
The goal of this project is to design a smart board level machine vision system using a beagleboneblack with its own image sensors/cameras. ...
With the help of proposed method for solution of quality assessment via computer vision, image analysis and processing there is a high degree of quality achieved as compared to human vision inspection. ...
doi:10.17148/ijireeice.2015.3208
fatcat:hecsoip6czaghnmkdebucvs2gu
Application of Risk Analysis Methods on Tailings Dams
2013
Soils and Rocks
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2022; you can also visit the original URL.
The file type is application/pdf.
under the name of "Risk Management for UK Reservoirs" and applied in Europe but not for tailings dams. ...
One of the procedures adopted in a Safety Management System is the use of Risk Analysis for which analytical, iterative, descriptive and qualitative methods, such as the FMEA "Failure Modes and Effects ...
Acknowledgments The authors thank FAPEMIG (Foundation of Support of Research of Minas Gerais) for financial support for this research and FEAM (State Foundation of Environmental) for logistic support. ...
doi:10.28927/sr.361097
fatcat:6i5jcdpqdjffzo2b6k3phezwzi
Deep learning applications for quality control in particle detector construction
[article]
2022
arXiv
pre-print
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2022; you can also visit the original URL.
The file type is application/pdf.
The growing complexity of particle detectors makes their construction and quality control a new challenge. ...
Here, we explore computer vision applications to either augment or fully replace visual inspections done by humans. ...
Figure 1b shows how wire bonds are arranged for HGCAL modules. Visual inspection of the wire bonds for each HGCAL module is pivotal. ...
arXiv:2203.08969v1
fatcat:4wpn666blnek7o7xehgdzwjdze
Former Foodstuff Products (FFPs) as Circular Feed: Types of Packaging Remnants and Methods for Their Detection
2022
Sustainability
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2022; you can also visit the original URL.
The file type is application/pdf.
Accordingly visual inspections, computer vision (CV), multivariate image analysis (MIA), and electric nose (e-nose) are discussed. ...
Although the level of contamination has been reported as negligible, to ensure a good risk evaluation and assessment of the presence of packaging remnants in FFPs, several techniques have been proposed ...
Acknowledgments: The authors are grateful to the company that have provided the samples for the present work.
Conflicts of Interest: The authors declare no conflict of interest. ...
doi:10.3390/su142113911
fatcat:k5tlwpcylfehhdgrwyypyelnaa
Air-coupled ultrasonic assessment of wood veneer
2010
Ultrasonics
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
Results of through-transmission ACU measurements on wood veneer samples and related products are reported with respect to a wide variety of quality aspects. ...
In addition the variability of the signal levels enables to distinguish between quarter and crown areas. ...
Acknowledgements The present work has been performed within the framework of a TETRA-Fund project (N° 040225) supported by IWT-Flanders (Institute for the promotion of Innovation by Science and Technology ...
doi:10.1016/j.ultras.2009.08.004
pmid:19748646
fatcat:dsiwhu7xbfdmtnknm5awkesqem
Air-coupled ultrasonic assessment of wood veneer
2010
Physics Procedia
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
Results of through-transmission ACU measurements on wood veneer samples and related products are reported with respect to a wide variety of quality aspects. ...
In addition the variability of the signal levels enables to distinguish between quarter and crown areas. ...
Acknowledgements The present work has been performed within the framework of a TETRA-Fund project (N° 040225) supported by IWT-Flanders (Institute for the promotion of Innovation by Science and Technology ...
doi:10.1016/j.phpro.2010.01.027
fatcat:po3ocbvbxzgjrmosuhqwyw5ivi
Mechanical characterization of visually classified, small-diameter laricio pine round timber
2007
Spanish Journal of Agricultural Research
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2009; you can also visit the original URL.
The file type is application/pdf.
., for its collaboration. ...
this material in the manufacture of particle boards and cellulose paste-applications that have turned very low profits for forest owners (Piqué and Romá, 2000) . ...
In Spain, small-diameter logs are basically used as biomass, in small rural applications (for making fence posts etc.), and for the manufacture of particle and fibre boards, cellulose paste and pallets ...
doi:10.5424/sjar/2007053-251
fatcat:nobzzn45lvep3dmgp4y3cwqcw4
Improving OSB wood panel production by vision-based systems for granulometric estimation
2015
2015 IEEE 1st International Forum on Research and Technologies for Society and Industry Leveraging a better tomorrow (RTSI)
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL.
The file type is application/pdf.
Oriented Strand Board (OSB) is a kind of engineered wood particle board widely adopted in manufacturing, construction and logistics. ...
Because of the very large amount of wood strands on the mat, particle-overlapping is frequent and represents a main issue for measurement algorithms. ...
Along with assessing the quality of a wood particle panel during the production [6] , [7] , machine vision is applicable also for quality assessment of the final product, such as in automatic visual ...
doi:10.1109/rtsi.2015.7325157
fatcat:pdcfgpz3wjdjrp5dji7gn636nu
Pharmaceutical Quality Analysis of Ceftriaxone Sodium Brands Marketed in Southern Nigeria
2016
British Journal of Pharmaceutical Research
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
The tested brands complied with the BP specifications for quality of Parenterals. ...
Standard physical and chemical tests for quality control of parenterals approved by the British Pharmacopoeia were performed on the branded sampled. ...
ACKNOWLEDGEMENTS We the author of this article wish to acknowledge tne contribution of Mrs Caleb of Pharmaceutical Microbiology Department, University of Port-Harcourt for her immense assistance in the ...
doi:10.9734/bjpr/2016/19577
fatcat:kuphpgjp5vhu5jblx5zujqg4ri
Automatic PCB inspection systems
1995
IEEE potentials
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
X-ray fast, quantitative dimen-imaging is used for rapid sional assessments. This and precise measuremeans better quality at a mentr of multilayer lower cost. Due to the fol-PCBs. ...
They are used for the actual exposure of the boards. ...
doi:10.1109/45.464686
fatcat:mxjp67to55buvgofx5pozmj2aa
Crowd Sourced Taxonomic Identification Guide for Categorization and Quantification of Fungal Spores by Optical Microscopy
2019
Open Access Journal of Mycology & Mycological Sciences
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2022; you can also visit the original URL.
The file type is application/pdf.
This contribution demonstrates an example of using a social network to create a visual search database to support human inspection of microscope imagery data of fungal spores. ...
Digital microscopy combined with the rapid proliferation of image sharing platforms offers a unique opportunity to harness this shared visual content for expanding education about key fungal spore type ...
Figure 1 : 1 Figure 1: Visual search results for the Pinterest board showing some of the spore categories. ...
doi:10.23880/oajmms-16000106
fatcat:kj55qxj3k5fzbj4g5gzhjt53iu
Root Cause Failure Analysis of Castings: A Case Study of a Brake Rotor
[chapter]
2022
Failure Analysis [Working Title]
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2022; you can also visit the original URL.
The file type is application/pdf.
To ensure that nonmetallic inclusions are kept out of cast components, several solutions for improving casting quality were proposed. ...
The eventual disc failure was initiated by micro-cracks developed within the inclusion particles and propagated through the weakest interface between flaky graphite and the pearlitic matrix. ...
Acknowledgements The component investigated in this publication was provided by the Quality Control Unit, Automotive Components Floby. ...
doi:10.5772/intechopen.107950
fatcat:a73bhrnicbh6fcch5gne5q3vym
Screening for counterfeit electronic parts
2011
Journal of materials science. Materials in electronics
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2014; you can also visit the original URL.
The file type is application/pdf.
The quality of excess parts depends on prior storage conditions, the duration of storage, and handling procedures. ...
; availability of cheap tools and parts to create counterfeits; and costly inspection/testing procedures. ...
Visual inspection also includes inspection of the part termination (leads or balls) quality to detect possible signs of counterfeiting. ...
doi:10.1007/s10854-011-0500-0
fatcat:2wjmw7p4tbdqrm6oxinkxyk2pu
« Previous
Showing results 1 — 15 out of 17,135 results